ÇKS WHITE PRIMER
ÇKS WHITE PRIMER
WHITE PRIMER PRODUCT NR - 40362
- Spec
- Docs
PRODUCT IDENTIFICATION:
White pigmented, water-based high-performance exterior coating with silicone
INTENDED USE: ÇKS BEYAZ ASTAR is designed for applications outdoors over the plastered surfaces of any type of materials including concrete, aerated concrete, briquette, and Eternit before finish coat
SURFACE PREPARATION PRIOR TO APPLICATION:
Remove all loose and flaky paint on the surface prior to coating.
Remove any traces of dust, grease, carbon black, and dirt on the surface, and if necessary, wipe and wash the surface with water.
Ensure the surface is thoroughly clean and free of any traces of dust, and avoid exposure to extreme wind or airflow and painting in windy weather
The ideal surface and ambient temperature range is +5 to +30˚C
APPLICATION:
Stir the primer thoroughly using a stir stick or mixer. Do not mix with any other primes or paints. Apply one coat ÇKS Alçı Astarı thoroughly on the surfaces prepared prior to application.
THINNING: Add 10% water to thin.
DRYING/RE-COATING: Full cure takes 6 hours (at 25°C and 50% RH).
COVERAGE: 10-12 m² /L, depending on the surface conditions
POST-APPLICATION CONDITIONS: Surfaces coated with ÇKS BEYAZ ASTAR allowed to cure for 6 hours before finish coating should be protected against rain, snow, frost, extreme heat, and physical impacts for 24 hours.
Do not empty the primer into waterways, drains, and sewers.
Contact the nearest ÇKS dealer for more information, and to find out how to dispose of the PRIMER properly.
Transport Information: Not subject to ADR-RID and IMDG transportation regulations.
Conditions for safe storage: Keep away from direct sunlight, rain, snow, extreme heat, humidity, and frost. In proper conditions, the product can be stored for a period of 2 years in its unopened original container.
Storage temperature: Store at room temperature
Freezing Point: Protect against freezing
Relative Humidity: 23±2°C; 50±5% relative humidity
Risk and Safety Phrases: R22: Harmful if swallowed, S2: Keep out of the reach of children. S3/7: Keep container tightly closed in a cool place, S24/25: Avoid contact with skin, and eyes. S29: Do not empty into drains. S46: If swallowed, seek medical advice immediately and show this container or label.
White pigmented, water-based high-performance exterior coating with silicone
INTENDED USE: ÇKS BEYAZ ASTAR is designed for applications outdoors over the plastered surfaces of any type of materials including concrete, aerated concrete, briquette, and Eternit before finish coat
SURFACE PREPARATION PRIOR TO APPLICATION:
Remove all loose and flaky paint on the surface prior to coating.
Remove any traces of dust, grease, carbon black, and dirt on the surface, and if necessary, wipe and wash the surface with water.
Ensure the surface is thoroughly clean and free of any traces of dust, and avoid exposure to extreme wind or airflow and painting in windy weather
The ideal surface and ambient temperature range is +5 to +30˚C
APPLICATION:
Stir the primer thoroughly using a stir stick or mixer. Do not mix with any other primes or paints. Apply one coat ÇKS Alçı Astarı thoroughly on the surfaces prepared prior to application.
THINNING: Add 10% water to thin.
DRYING/RE-COATING: Full cure takes 6 hours (at 25°C and 50% RH).
COVERAGE: 10-12 m² /L, depending on the surface conditions
POST-APPLICATION CONDITIONS: Surfaces coated with ÇKS BEYAZ ASTAR allowed to cure for 6 hours before finish coating should be protected against rain, snow, frost, extreme heat, and physical impacts for 24 hours.
Do not empty the primer into waterways, drains, and sewers.
Contact the nearest ÇKS dealer for more information, and to find out how to dispose of the PRIMER properly.
Transport Information: Not subject to ADR-RID and IMDG transportation regulations.
Conditions for safe storage: Keep away from direct sunlight, rain, snow, extreme heat, humidity, and frost. In proper conditions, the product can be stored for a period of 2 years in its unopened original container.
Storage temperature: Store at room temperature
Freezing Point: Protect against freezing
Relative Humidity: 23±2°C; 50±5% relative humidity
Risk and Safety Phrases: R22: Harmful if swallowed, S2: Keep out of the reach of children. S3/7: Keep container tightly closed in a cool place, S24/25: Avoid contact with skin, and eyes. S29: Do not empty into drains. S46: If swallowed, seek medical advice immediately and show this container or label.