ÇKS ULTRA SILKMAT PLAST SILICONE MAT PAINT
ÇKS ULTRA SILKMAT PLAST SILICONE MAT PAINT
SILICONE MAT PAINT PRODUCT NR - 40346
- Özellikler
- Belgeler
SILICONE-BASED, WIPE-CLEAN, HIGH-PERFORMANCE INTERIOR FINAL COATING PAINT WITH SILKY MATT FINISH
SURFACE PREPARATION PRIOR TO APPLICATION:
Remove all loose and flaky paint on the surface prior to coating. Ensure the surface is thoroughly clean and free of any traces of dust. Repair the surface by filling in the holes and cracks with putty Ensure the surface is thoroughly clean and free of any traces of dust, and avoid exposure to extreme wind or airflow and painting in windy weather.
The ideal surface temperature range is +5 to +30˚C.
Depending on the surface conditions apply one coat ÇKS ALÇI ASTARI a primer similar to satin primer prevents dusting and polishing, and shows high absorbency performance on the surface. For the surfaces previously painted or covered with solvent based paints or coated with mineral based low absorbent raw plaster sand and clean the surface, and apply one coat ÇKS ULTRA BINDER.
APPLICATION
Stir the paint thoroughly prior to the application and depending on the surface condition, prepare the surface considering the surface conditions, and then apply the primer. Leave 6 (six) hours (at 25°C and 65% RH) drying time for the primer, and then add 20% water by volume to thin ÇKS ULTURA SILKMAT PLAST, and apply the first coat by a brush. Leave 6 hours of drying time (at 25°C and 65% RH) before you start applying your second coat.
COVERAGE:
1Kg ÇKS ULTURA SILKMAT PLAST covers 14 to-15 m² in one coat, depending on the smoothness and absorbency of the surface.
POST-APPLICATION CONDITIONS:
Protect the surfaces coated with ÇKS ULTURA SILKMAT PLAST against rain, frost, extreme heat, and physical impacts for 24 hours.
Clean your brush and roller with water after each application.
CONDITIONS FOR SAFE STORAGE:
Keep away from direct sunlight, rain, snow, extreme heat, humidity, and frost. In proper conditions, the product can be stored for a period of 2 years in its unopened original
SURFACE PREPARATION PRIOR TO APPLICATION:
Remove all loose and flaky paint on the surface prior to coating. Ensure the surface is thoroughly clean and free of any traces of dust. Repair the surface by filling in the holes and cracks with putty Ensure the surface is thoroughly clean and free of any traces of dust, and avoid exposure to extreme wind or airflow and painting in windy weather.
The ideal surface temperature range is +5 to +30˚C.
Depending on the surface conditions apply one coat ÇKS ALÇI ASTARI a primer similar to satin primer prevents dusting and polishing, and shows high absorbency performance on the surface. For the surfaces previously painted or covered with solvent based paints or coated with mineral based low absorbent raw plaster sand and clean the surface, and apply one coat ÇKS ULTRA BINDER.
APPLICATION
Stir the paint thoroughly prior to the application and depending on the surface condition, prepare the surface considering the surface conditions, and then apply the primer. Leave 6 (six) hours (at 25°C and 65% RH) drying time for the primer, and then add 20% water by volume to thin ÇKS ULTURA SILKMAT PLAST, and apply the first coat by a brush. Leave 6 hours of drying time (at 25°C and 65% RH) before you start applying your second coat.
COVERAGE:
1Kg ÇKS ULTURA SILKMAT PLAST covers 14 to-15 m² in one coat, depending on the smoothness and absorbency of the surface.
POST-APPLICATION CONDITIONS:
Protect the surfaces coated with ÇKS ULTURA SILKMAT PLAST against rain, frost, extreme heat, and physical impacts for 24 hours.
Clean your brush and roller with water after each application.
CONDITIONS FOR SAFE STORAGE:
Keep away from direct sunlight, rain, snow, extreme heat, humidity, and frost. In proper conditions, the product can be stored for a period of 2 years in its unopened original