ÇKS SOFT MATPLAST PAINT
ÇKS SOFT MATPLAST PAINT
SOFT MATPLAST PRODUCT NR - 40322
- Özellikler
- Belgeler
-FOR USE ON SURFACES OF ANY KIND PREPARED WITH SATIN PLASTER, PUTTY, OR PRIMER, AND PREVIOUSLY PAINTED SURFACES
-WIPE-CLEANED, PAINT WITH EGGSHELL MATT FINISH AND SILICONE
SURFACE PREPARATION PRIOR TO APPLICATION
Remove all loose and flaky paint on the surface prior to coating. Repair the surface by filling in the holes and cracks with acrylic putty. Add 1:7 parts water to thin ÇKS Ultra Binder, and apply one coat over exposed surfaces not painted before, or particularly limewashed surfaces prior to application. Ensure the surface is thoroughly clean and free of any traces of dust prior to primer or paint application, and avoid exposure to extreme wind or airflow and painting in windy weather.
The ideal surface temperature range is +5 to +30˚C.
Stir the paint thoroughly before use, and do not mix with any other paints.
APPLICATION
Stir the paint thoroughly before use, and do not mix with any other paints.
After surface preparation, apply primer. At least 2 hours after the primer application, add 20% to 25% water to thin ÇKS Soft Matplast, and apply two coats by a brush or roller. Leave 2 hours of drying time before you start applying your second coat.
Drying (at 25°C and 15% RH): Touch dry: 15 minutes, dust dry: 60 minutes, Final dry: 24 hours.
Coverage: 14-18 m2/kg, one coat, depending on the smoothness and absorbency of the surface.
POST-APPLICATION CONDITIONS
Protect the surface coated with ÇKS Soft Matplast against rain, extreme heat, humidity, and frost for 24 hours, and against physical impacts for 3 days. Clean your brush and roller with water after each application.
CONDITIONS FOR SAFE STORAGE
Keep away from direct sunlight, rain, snow, extreme heat, humidity, and frost. In proper conditions, the product can be stored for a period of 2 years in its unopened original container.
APPLICATION TEMPERATURE
5˚C to 30˚C
-WIPE-CLEANED, PAINT WITH EGGSHELL MATT FINISH AND SILICONE
SURFACE PREPARATION PRIOR TO APPLICATION
Remove all loose and flaky paint on the surface prior to coating. Repair the surface by filling in the holes and cracks with acrylic putty. Add 1:7 parts water to thin ÇKS Ultra Binder, and apply one coat over exposed surfaces not painted before, or particularly limewashed surfaces prior to application. Ensure the surface is thoroughly clean and free of any traces of dust prior to primer or paint application, and avoid exposure to extreme wind or airflow and painting in windy weather.
The ideal surface temperature range is +5 to +30˚C.
Stir the paint thoroughly before use, and do not mix with any other paints.
APPLICATION
Stir the paint thoroughly before use, and do not mix with any other paints.
After surface preparation, apply primer. At least 2 hours after the primer application, add 20% to 25% water to thin ÇKS Soft Matplast, and apply two coats by a brush or roller. Leave 2 hours of drying time before you start applying your second coat.
Drying (at 25°C and 15% RH): Touch dry: 15 minutes, dust dry: 60 minutes, Final dry: 24 hours.
Coverage: 14-18 m2/kg, one coat, depending on the smoothness and absorbency of the surface.
POST-APPLICATION CONDITIONS
Protect the surface coated with ÇKS Soft Matplast against rain, extreme heat, humidity, and frost for 24 hours, and against physical impacts for 3 days. Clean your brush and roller with water after each application.
CONDITIONS FOR SAFE STORAGE
Keep away from direct sunlight, rain, snow, extreme heat, humidity, and frost. In proper conditions, the product can be stored for a period of 2 years in its unopened original container.
APPLICATION TEMPERATURE
5˚C to 30˚C