ÇKS SHIELD ACRYLIC ELASTIC SURFACE COATING FOR 100% WATERPROOFING
ÇKS SHIELD ACRYLIC ELASTIC SURFACE COATING FOR 100% WATERPROOFING
SHIELD PRODUCT NR - 40090
- Özellikler
- Belgeler
Acrylic Elastic Surface Coating For 100% Waterproofing
Elastic acrylic based exterior surface coating material, providing 100% water isolation on exterior surfaces of the building and a decorative appearance with a thick film layer formation on the surface. Elastic, light and strong with high adherence. High UV endurance. Overlays the cracks on the surface. Overcome the swelling problems of the surfaces. High resistance to the chemical corrosions, fungus and bacterial formations. Very strong adhesive properties on the surfaces. Provides thermal isolation for heating cost reduction.
Areas of use:
On the surface of walls, wood and metal
Application:
For new construction
Horizontal and vertical areas need to apply with ÇKSFIXER. After waiting two hours minimum, apply as two layers of ÇKSSHIELD. Brush or roll can be use.
For old construction
Any old, loose and swelled paint layers on the surfaces must be removed. Cracks and splits on the surface must be repaired. If there are fungus and mossy areas on the wall, fungus repellent needs to be applied before applying ÇKSFIXER . After waiting two hours minimum, apply as two layers of ÇKSSHIELD. Brush or roll can be use.
Drying time:
Drying time of the ÇKSSHIELD can vary with temperature and air conditions.
At 25°C, between first and second layer needs to be waited 30 minutes. After second layer, drying time is 4 hours.
Consumption:
As two layers of application, the 1 m2 surface can be covered with 0,6-0,9 kg.,
On smooth surfaces if there is need for thin filming can be covered with 0,4-0,6 kg.
Elastic acrylic based exterior surface coating material, providing 100% water isolation on exterior surfaces of the building and a decorative appearance with a thick film layer formation on the surface. Elastic, light and strong with high adherence. High UV endurance. Overlays the cracks on the surface. Overcome the swelling problems of the surfaces. High resistance to the chemical corrosions, fungus and bacterial formations. Very strong adhesive properties on the surfaces. Provides thermal isolation for heating cost reduction.
Areas of use:
On the surface of walls, wood and metal
Application:
For new construction
Horizontal and vertical areas need to apply with ÇKSFIXER. After waiting two hours minimum, apply as two layers of ÇKSSHIELD. Brush or roll can be use.
For old construction
Any old, loose and swelled paint layers on the surfaces must be removed. Cracks and splits on the surface must be repaired. If there are fungus and mossy areas on the wall, fungus repellent needs to be applied before applying ÇKSFIXER . After waiting two hours minimum, apply as two layers of ÇKSSHIELD. Brush or roll can be use.
Drying time:
Drying time of the ÇKSSHIELD can vary with temperature and air conditions.
At 25°C, between first and second layer needs to be waited 30 minutes. After second layer, drying time is 4 hours.
Consumption:
As two layers of application, the 1 m2 surface can be covered with 0,6-0,9 kg.,
On smooth surfaces if there is need for thin filming can be covered with 0,4-0,6 kg.